dmesg - 2013-06-23 11:21

Return To 2013-06-23 11:21 System Information

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-48-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #74-Ubuntu SMP Thu Jun 6 19:43:26 UTC 2013 (Ubuntu 3.2.0-48.74-generic 3.2.46)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fea0000 (usable)
[    0.000000]  BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feac000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard Pavilion dv5000 (RA652EA#ABZ)     /30A4, BIOS F.42 06/21/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7fea0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-CFFFF uncachable
[    0.000000]   D0000-D5FFF write-back
[    0.000000]   D6000-D6FFF uncachable
[    0.000000]   D7000-DBFFF write-protect
[    0.000000]   DC000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f7c50] f7c50
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000007fea0000
[    0.000000]  0000000000 - 007fe00000 page 2M
[    0.000000]  007fe00000 - 007fea0000 page 4k
[    0.000000] kernel direct mapping tables up to 7fea0000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 364c2000 - 37259000
[    0.000000] ACPI: RSDP 00000000000f7c20 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 000000007fea4598 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 000000007feabe3b 00074 (v01 HP     Piranha  06040000 ATI  000F4240)
[    0.000000] ACPI: DSDT 000000007fea45cc 0786F (v01     HP     309B 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000007feacfc0 00040
[    0.000000] ACPI: SSDT 000000007feabeaf 000CF (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 000000007feabf7e 00046 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 000000007feabfc4 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007fea0000
[    0.000000] Initmem setup node 0 0000000000000000-000000007fea0000
[    0.000000]   NODE_DATA [000000007fe9b000 - 000000007fe9ffff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fea0
[    0.000000] On node 0 totalpages: 523823
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8123 pages used for memmap
[    0.000000]   DMA32 zone: 511717 pages, LIFO batch:31
[    0.000000] SB4X0 revision 0x11
[    0.000000] Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83136 r8192 d23360 u2097152
[    0.000000] pcpu-alloc: s83136 r8192 d23360 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515631
[    0.000000] Policy zone: DMA32
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c06c000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2032664k/2095744k available (6581k kernel code, 452k absent, 62628k reserved, 6624k data, 924k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1790.687 MHz processor.
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3581.37 BogoMIPS (lpj=7162748)
[    0.008011] pid_max: default: 32768 minimum: 301
[    0.008050] Security Framework initialized
[    0.008080] AppArmor: AppArmor initialized
[    0.008082] Yama: becoming mindful.
[    0.012140] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014403] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015522] Mount-cache hash table entries: 256
[    0.015757] Initializing cgroup subsys cpuacct
[    0.015764] Initializing cgroup subsys memory
[    0.015781] Initializing cgroup subsys devices
[    0.015784] Initializing cgroup subsys freezer
[    0.015787] Initializing cgroup subsys blkio
[    0.015797] Initializing cgroup subsys perf_event
[    0.015842] tseg: 007ff00000
[    0.015846] mce: CPU supports 5 MCE banks
[    0.015895] SMP alternatives: switching to UP code
[    0.024731] Freeing SMP alternatives: 24k freed
[    0.024753] ACPI: Core revision 20110623
[    0.028018] ftrace: allocating 26580 entries in 105 pages
[    0.032587] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.075134] CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
[    0.076004] Performance Events: AMD PMU driver.
[    0.076004] ... version:                0
[    0.076004] ... bit width:              48
[    0.076004] ... generic registers:      4
[    0.076004] ... value mask:             0000ffffffffffff
[    0.076004] ... max period:             00007fffffffffff
[    0.076004] ... fixed-purpose events:   0
[    0.076004] ... event mask:             000000000000000f
[    0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[    0.076004] Brought up 1 CPUs
[    0.076004] Total of 1 processors activated (3581.37 BogoMIPS).
[    0.076004] devtmpfs: initialized
[    0.076004] EVM: security.selinux
[    0.076004] EVM: security.SMACK64
[    0.076004] EVM: security.capability
[    0.076004] PM: Registering ACPI NVS region at 7feac000 (344064 bytes)
[    0.076364] print_constraints: dummy: 
[    0.076404] RTC time:  8:58:31, date: 06/23/13
[    0.076454] NET: Registered protocol family 16
[    0.076609] node 0 link 0: io port [1000, fffff]
[    0.076613] TOM: 0000000080000000 aka 2048M
[    0.076617] node 0 link 0: mmio [a0000, bffff]
[    0.076621] node 0 link 0: mmio [f0000000, ffffffff]
[    0.076625] node 0 link 0: mmio [e0000000, efffffff]
[    0.076628] node 0 link 0: mmio [80000000, dfffffff]
[    0.076632] bus: [00, ff] on node 0 link 0
[    0.076636] bus: 00 index 0 [io  0x0000-0xffff]
[    0.076639] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.076642] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[    0.076654] ACPI: bus type pci registered
[    0.076736] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
[    0.076741] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
[    0.077473] PCI: Using configuration type 1 for base access
[    0.078844] bio: create slab  at 0
[    0.078960] ACPI: Added _OSI(Module Device)
[    0.078963] ACPI: Added _OSI(Processor Device)
[    0.078966] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.078968] ACPI: Added _OSI(Processor Aggregator Device)
[    0.080230] ACPI: EC: Look up EC in DSDT
[    0.082800] ACPI: Interpreter enabled
[    0.082805] ACPI: (supports S0 S3 S4 S5)
[    0.082825] ACPI: Using IOAPIC for interrupt routing
[    0.144663] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[    0.144803] ACPI: No dock devices found.
[    0.144805] HEST: Table not found.
[    0.144810] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.145506] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.146905] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.146910] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
[    0.146914] pci_root PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
[    0.146918] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[    0.146922] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.146925] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.146937] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
[    0.146977] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604
[    0.147031] pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604
[    0.147075] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.147080] pci 0000:00:05.0: PME# disabled
[    0.147130] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03
[    0.147156] pci 0000:00:13.0: reg 10: [mem 0xc0000000-0xc0000fff]
[    0.147293] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03
[    0.147319] pci 0000:00:13.1: reg 10: [mem 0xc0001000-0xc0001fff]
[    0.147460] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03
[    0.147489] pci 0000:00:13.2: reg 10: [mem 0xc0002000-0xc0002fff]
[    0.147615] pci 0000:00:13.2: supports D1 D2
[    0.147618] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.147624] pci 0000:00:13.2: PME# disabled
[    0.147665] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05
[    0.147689] pci 0000:00:14.0: reg 10: [io  0x8400-0x840f]
[    0.147703] pci 0000:00:14.0: reg 14: [mem 0xc0003000-0xc00033ff]
[    0.147767] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.147828] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101
[    0.147853] pci 0000:00:14.1: reg 10: [io  0x8430-0x8437]
[    0.147868] pci 0000:00:14.1: reg 14: [io  0x8424-0x8427]
[    0.147882] pci 0000:00:14.1: reg 18: [io  0x8428-0x842f]
[    0.147897] pci 0000:00:14.1: reg 1c: [io  0x8420-0x8423]
[    0.147912] pci 0000:00:14.1: reg 20: [io  0x8410-0x841f]
[    0.148000] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601
[    0.148122] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604
[    0.148194] pci 0000:00:14.5: [1002:4370] type 0 class 0x000401
[    0.148219] pci 0000:00:14.5: reg 10: [mem 0xc0003400-0xc00034ff]
[    0.148355] pci 0000:00:14.6: [1002:4378] type 0 class 0x000703
[    0.148380] pci 0000:00:14.6: reg 10: [mem 0xc0003800-0xc00038ff]
[    0.148513] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.148543] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.148568] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.148592] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.148625] PCI: peer root bus 00 res updated from pci conf
[    0.148657] pci 0000:01:05.0: [1002:5955] type 0 class 0x000300
[    0.148668] pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
[    0.148675] pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
[    0.148682] pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff]
[    0.148699] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.148714] pci 0000:01:05.0: supports D1 D2
[    0.148734] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.148740] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.148744] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.148749] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.148783] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[    0.148822] pci 0000:06:02.0: [14e4:4318] type 0 class 0x000280
[    0.148845] pci 0000:06:02.0: reg 10: [mem 0xc0204000-0xc0205fff]
[    0.148973] pci 0000:06:04.0: [104c:8031] type 2 class 0x000607
[    0.149004] pci 0000:06:04.0: reg 10: [mem 0xc0208000-0xc0208fff]
[    0.149056] pci 0000:06:04.0: supports D1 D2
[    0.149058] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.149065] pci 0000:06:04.0: PME# disabled
[    0.149100] pci 0000:06:04.2: [104c:8032] type 0 class 0x000c00
[    0.149131] pci 0000:06:04.2: reg 10: [mem 0xc0209000-0xc02097ff]
[    0.149149] pci 0000:06:04.2: reg 14: [mem 0xc0200000-0xc0203fff]
[    0.149276] pci 0000:06:04.2: supports D1 D2
[    0.149279] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.149286] pci 0000:06:04.2: PME# disabled
[    0.149317] pci 0000:06:04.3: [104c:8033] type 0 class 0x000180
[    0.149347] pci 0000:06:04.3: reg 10: [mem 0xc0206000-0xc0207fff]
[    0.149481] pci 0000:06:04.3: supports D1 D2
[    0.149484] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[    0.149491] pci 0000:06:04.3: PME# disabled
[    0.149521] pci 0000:06:04.4: [104c:8034] type 0 class 0x000805
[    0.149551] pci 0000:06:04.4: reg 10: [mem 0xc020a000-0xc020a0ff]
[    0.149569] pci 0000:06:04.4: reg 14: [mem 0xc0209c00-0xc0209cff]
[    0.149586] pci 0000:06:04.4: reg 18: [mem 0xc0209800-0xc02098ff]
[    0.149692] pci 0000:06:04.4: supports D1 D2
[    0.149695] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[    0.149702] pci 0000:06:04.4: PME# disabled
[    0.149743] pci 0000:06:06.0: [10ec:8139] type 0 class 0x000200
[    0.149774] pci 0000:06:06.0: reg 10: [io  0xa000-0xa0ff]
[    0.149791] pci 0000:06:06.0: reg 14: [mem 0xc020a400-0xc020a4ff]
[    0.149912] pci 0000:06:06.0: supports D1 D2
[    0.149915] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.149921] pci 0000:06:06.0: PME# disabled
[    0.149987] pci 0000:00:14.4: PCI bridge to [bus 06-08] (subtractive decode)
[    0.149998] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.150004] pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.150011] pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.150015] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.150018] pci 0000:00:14.4:   bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[    0.150098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.150168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.150230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.150291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.150343]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.150348]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.150350] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.152912] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.152969] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.153024] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.153083] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.153137] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.153191] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.153246] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.153300] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.153460] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.153466] vgaarb: loaded
[    0.153467] vgaarb: bridge control possible 0000:01:05.0
[    0.153615] i2c-core: driver [aat2870] using legacy suspend method
[    0.153618] i2c-core: driver [aat2870] using legacy resume method
[    0.153713] SCSI subsystem initialized
[    0.153803] libata version 3.00 loaded.
[    0.153867] usbcore: registered new interface driver usbfs
[    0.153882] usbcore: registered new interface driver hub
[    0.153919] usbcore: registered new device driver usb
[    0.154041] PCI: Using ACPI for IRQ routing
[    0.154162] PCI: pci_cache_line_size set to 64 bytes
[    0.154263] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.154267] reserve RAM buffer: 000000007fea0000 - 000000007fffffff 
[    0.154408] NetLabel: Initializing
[    0.154410] NetLabel:  domain hash size = 128
[    0.154412] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.154433] NetLabel:  unlabeled traffic allowed by default
[    0.165111] AppArmor: AppArmor Filesystem Enabled
[    0.165166] pnp: PnP ACPI init
[    0.165206] ACPI: bus type pnp registered
[    0.165945] pnp 00:00: [bus 00-ff]
[    0.165948] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.165952] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[    0.165955] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[    0.165958] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[    0.165962] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[    0.165965] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[    0.165968] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[    0.165971] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[    0.165975] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[    0.165978] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[    0.165981] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[    0.165985] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[    0.165988] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[    0.165991] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[    0.165995] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[    0.165998] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[    0.166001] pnp 00:00: [mem 0x000de000-0x000dffff window]
[    0.166005] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[    0.166008] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[    0.166011] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[    0.166014] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[    0.166018] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[    0.166021] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[    0.166024] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[    0.166028] pnp 00:00: [mem 0x000ee000-0x000effff window]
[    0.166031] pnp 00:00: [mem 0x80000000-0xffffffff window]
[    0.166035] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.166038] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.166041] pnp 00:00: [io  0x0d00-0xffff window]
[    0.166119] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.166146] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.166149] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.166152] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.166233] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.166238] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.166242] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.166246] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166505] pnp 00:02: [io  0x0000-0x001f]
[    0.166508] pnp 00:02: [io  0x0080-0x008f]
[    0.166511] pnp 00:02: [io  0x00c0-0x00df]
[    0.166514] pnp 00:02: [dma 4]
[    0.166554] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.166569] pnp 00:03: [io  0x00f0-0x00fe]
[    0.166590] pnp 00:03: [irq 13]
[    0.166625] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.166640] pnp 00:04: [io  0x0070-0x0071]
[    0.166647] pnp 00:04: [irq 8]
[    0.166685] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166697] pnp 00:05: [io  0x0061]
[    0.166736] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.166750] pnp 00:06: [io  0x0060]
[    0.166753] pnp 00:06: [io  0x0064]
[    0.166760] pnp 00:06: [irq 1]
[    0.166806] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.166823] pnp 00:07: [irq 12]
[    0.166872] pnp 00:07: Plug and Play ACPI device, IDs SYN0120 SYN0100 SYN0002 PNP0f13 (active)
[    0.166890] pnp 00:08: [io  0x0072-0x0073]
[    0.166893] pnp 00:08: [io  0x1080]
[    0.166896] pnp 00:08: [io  0x00b0-0x00b1]
[    0.166898] pnp 00:08: [io  0x0092]
[    0.166901] pnp 00:08: [io  0x040b]
[    0.166904] pnp 00:08: [io  0x04d0-0x04d1]
[    0.166906] pnp 00:08: [io  0x04d6]
[    0.166909] pnp 00:08: [io  0x0870-0x087f]
[    0.166912] pnp 00:08: [io  0x0c00-0x0c01]
[    0.166915] pnp 00:08: [io  0x0c14]
[    0.166917] pnp 00:08: [io  0x0c50-0x0c52]
[    0.166920] pnp 00:08: [io  0x0c6c]
[    0.166922] pnp 00:08: [io  0x0c6f]
[    0.166925] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.166928] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.166931] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.166933] pnp 00:08: [io  0x8000-0x805f]
[    0.166937] pnp 00:08: [io  0x8100-0x81ff window]
[    0.166940] pnp 00:08: [io  0x0f40-0x0f47]
[    0.166942] pnp 00:08: [io  0x0280-0x0293]
[    0.167010] system 00:08: [io  0x1080] has been reserved
[    0.167014] system 00:08: [io  0x040b] has been reserved
[    0.167018] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.167021] system 00:08: [io  0x04d6] has been reserved
[    0.167030] system 00:08: [io  0x0870-0x087f] has been reserved
[    0.167033] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.167037] system 00:08: [io  0x0c14] has been reserved
[    0.167041] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.167044] system 00:08: [io  0x0c6c] has been reserved
[    0.167048] system 00:08: [io  0x0c6f] has been reserved
[    0.167051] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.167055] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.167058] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.167062] system 00:08: [io  0x8000-0x805f] has been reserved
[    0.167066] system 00:08: [io  0x8100-0x81ff window] has been reserved
[    0.167070] system 00:08: [io  0x0f40-0x0f47] has been reserved
[    0.167073] system 00:08: [io  0x0280-0x0293] has been reserved
[    0.167078] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167140] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    0.167143] pnp 00:09: [mem 0xfff80000-0xffffffff]
[    0.167146] pnp 00:09: [mem 0x00000000-0x00000fff]
[    0.167163] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.167214] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.167218] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
[    0.167223] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.188045] pnp: PnP ACPI: found 10 devices
[    0.188048] ACPI: ACPI bus type pnp unregistered
[    0.194938] Switching to clocksource acpi_pm
[    0.194966] PCI: max bus depth: 2 pci_try_num: 3
[    0.194996] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.195001] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[    0.195006] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.195010] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.195014] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.195019] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.195024] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[    0.195039] pci 0000:06:04.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[    0.195043] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.195047] pci 0000:06:04.0: BAR 14: assigned [io  0xa400-0xa4ff]
[    0.195051] pci 0000:06:04.0: BAR 13: assigned [io  0xa800-0xa8ff]
[    0.195055] pci 0000:06:04.0: CardBus bridge to [bus 07-07]
[    0.195058] pci 0000:06:04.0:   bridge window [io  0xa800-0xa8ff]
[    0.195065] pci 0000:06:04.0:   bridge window [io  0xa400-0xa4ff]
[    0.195072] pci 0000:06:04.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.195079] pci 0000:06:04.0:   bridge window [mem 0x84000000-0x87ffffff]
[    0.195086] pci 0000:00:14.4: PCI bridge to [bus 06-08]
[    0.195091] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.195099] pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.195105] pci 0000:00:14.4:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.195125] pci 0000:00:05.0: setting latency timer to 64
[    0.195152] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.195160] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.195164] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.195167] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[    0.195171] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.195174] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    0.195178] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.195182] pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
[    0.195185] pci_bus 0000:06: resource 1 [mem 0xc0200000-0xc02fffff]
[    0.195189] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.195193] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.195196] pci_bus 0000:06: resource 5 [mem 0x000a0000-0x000bffff]
[    0.195200] pci_bus 0000:06: resource 6 [mem 0x80000000-0xfcffffffff]
[    0.195203] pci_bus 0000:07: resource 0 [io  0xa800-0xa8ff]
[    0.195207] pci_bus 0000:07: resource 1 [io  0xa400-0xa4ff]
[    0.195210] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.195213] pci_bus 0000:07: resource 3 [mem 0x84000000-0x87ffffff]
[    0.195275] NET: Registered protocol family 2
[    0.195410] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.195410] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.198047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.199149] TCP: Hash tables configured (established 262144 bind 65536)
[    0.199154] TCP reno registered
[    0.199166] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.199216] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.199388] NET: Registered protocol family 1
[    0.199407] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.199417] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.199449] pci 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.252061] pci 0000:00:13.0: PCI INT A disabled
[    0.252072] pci 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.308034] pci 0000:00:13.1: PCI INT A disabled
[    0.308046] pci 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.308067] pci 0000:00:13.2: PCI INT A disabled
[    0.308103] pci 0000:01:05.0: Boot video device
[    0.308129] PCI: CLS 32 bytes, default 64
[    0.309016] audit: initializing netlink socket (disabled)
[    0.309031] type=2000 audit(1371977911.304:1): initialized
[    0.340253] Trying to unpack rootfs image as initramfs...
[    0.348558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.356264] VFS: Disk quotas dquot_6.5.2
[    0.356364] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.357113] fuse init (API version 7.17)
[    0.357233] msgmni has been set to 3970
[    0.364361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.368221] io scheduler noop registered
[    0.368224] io scheduler deadline registered
[    0.368299] io scheduler cfq registered (default)
[    0.376291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.376321] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.382976] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.385236] ACPI: AC Adapter [ACAD] (on-line)
[    0.385338] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.385375] ACPI: Lid Switch [LID]
[    0.385434] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.385440] ACPI: Power Button [PWRB]
[    0.385507] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.385511] ACPI: Power Button [PWRF]
[    0.385574] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[    0.385578] ACPI: Sleep Button [SLPF]
[    0.385648] Marking TSC unstable due to TSC halts in idle
[    0.385662] ACPI: acpi_idle registered with cpuidle
[    0.422061] ACPI: Invalid active0 threshold
[    0.429011] thermal LNXTHERM:00: registered as thermal_zone0
[    0.429016] ACPI: Thermal Zone [THRM] (0 C)
[    0.429087] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.429106] ACPI: Battery Slot [BAT1] (battery absent)
[    0.429134] ERST: Table is not found!
[    0.429137] GHES: HEST is not enabled!
[    0.430963] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.431009] serial 0000:00:14.6: PCI INT B disabled
[    0.431171] Linux agpgart interface v0.103
[    0.436988] brd: module loaded
[    0.438110] loop: module loaded
[    0.438537] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.438598] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.439052] Fixed MDIO Bus: probed
[    0.439124] tun: Universal TUN/TAP device driver, 1.6
[    0.439127] tun: (C) 1999-2004 Max Krasnyansky 
[    0.439185] PPP generic driver version 2.4.2
[    0.439306] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.439327] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.439354] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.439405] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    0.439489] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[    0.448053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.448355] hub 1-0:1.0: USB hub found
[    0.448362] hub 1-0:1.0: 8 ports detected
[    0.448516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.448550] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.448586] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.448664] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.448695] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[    0.456226] ACPI: Battery Slot [BAT1] (battery absent)
[    0.512375] hub 2-0:1.0: USB hub found
[    0.512387] hub 2-0:1.0: 4 ports detected
[    0.512506] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.512542] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.512604] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.512634] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[    0.576273] hub 3-0:1.0: USB hub found
[    0.576286] hub 3-0:1.0: 4 ports detected
[    0.576404] uhci_hcd: USB Universal Host Controller Interface driver
[    0.576496] usbcore: registered new interface driver libusual
[    0.576550] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.595601] i8042: Detected active multiplexing controller, rev 1.1
[    0.642189] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.642209] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.648281] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.648343] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.648376] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.648556] mousedev: PS/2 mouse device common for all mice
[    0.648830] rtc_cmos 00:04: RTC can wake from S4
[    0.648979] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.649017] rtc0: alarms up to one month, 114 bytes nvram
[    0.649155] device-mapper: uevent: version 1.0.3
[    0.649253] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.649313] cpuidle: using governor ladder
[    0.649379] cpuidle: using governor menu
[    0.649382] EFI Variables Facility v0.08 2004-May-17
[    0.649689] TCP cubic registered
[    0.649842] NET: Registered protocol family 10
[    0.650787] NET: Registered protocol family 17
[    0.650793] Registering the dns_resolver key type
[    0.650947] PM: Hibernation image not present or could not be loaded.
[    0.650965] registered taskstats version 1
[    0.666698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.796277] Freeing initrd memory: 13916k freed
[    0.819404]   Magic number: 1:19:979
[    0.819548] rtc_cmos 00:04: setting system clock to 2013-06-23 08:58:32 UTC (1371977912)
[    0.819554] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34 (1 cpu cores) (version 2.20.00)
[    0.826490] powernow-k8: fid 0xa (1800 MHz), vid 0x4
[    0.826493] powernow-k8: fid 0x8 (1600 MHz), vid 0x6
[    0.826495] powernow-k8: fid 0x0 (800 MHz), vid 0x16
[    0.826545] powernow-k8: ph2 null fid transition 0xa
[    0.826584] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.826586] EDD information not available.
[    0.829000] Freeing unused kernel memory: 924k freed
[    0.829658] Write protecting the kernel read-only data: 12288k
[    0.837210] Freeing unused kernel memory: 1592k freed
[    0.844436] Freeing unused kernel memory: 1188k freed
[    0.868751] udevd[80]: starting version 175
[    1.008875] scsi0 : pata_atiixp
[    1.012085] scsi1 : pata_atiixp
[    1.013047] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[    1.013051] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[    1.033677] b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.051297] sdhci: Secure Digital Host Controller Interface driver
[    1.051302] sdhci: Copyright(c) Pierre Ossman
[    1.052134] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    1.052146] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    1.052156] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    1.052166] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    1.059932] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.068108] usb 3-3: new full-speed USB device number 2 using ohci_hcd
[    1.092176] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[    1.092244] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.177195] ata2.00: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33
[    1.177300] ata1.00: ATA-6: FUJITSU MHV2100AH, 00830096, max UDMA/100
[    1.177304] ata1.00: 195371568 sectors, multi 16: LBA 
[    1.192537] ata1.00: configured for UDMA/100
[    1.192705] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2100A 0083 PQ: 0 ANSI: 5
[    1.192985] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.193099] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[    1.193160] sd 0:0:0:0: [sda] Write Protect is off
[    1.193163] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.193190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.194061] ata2.00: configured for UDMA/33
[    1.196214] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.05 PQ: 0 ANSI: 5
[    1.199719] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.199723] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.199867] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.200056] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.278627]  sda: sda1 sda3 < sda5 sda6 sda7 sda8 >
[    1.279122] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.279813] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[    1.279835] sdhci-pci 0000:06:04.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.279900] mmc0: no vmmc regulator found
[    1.279940] Registered led device: mmc0::
[    1.280985] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO
[    1.281011] mmc1: no vmmc regulator found
[    1.281042] Registered led device: mmc1::
[    1.282211] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[    1.282238] mmc2: no vmmc regulator found
[    1.282268] Registered led device: mmc2::
[    1.283319] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO
[    1.285599] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.285919] 8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.287451] 8139too 0000:06:06.0: eth0: RealTek RTL8139 at 0xa000, 00:16:d4:3c:81:45, IRQ 22
[    1.290027] firewire_ohci 0000:06:04.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    1.331893] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3:1.0/input/input5
[    1.332213] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3/input0
[    1.340342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3:1.1/input/input6
[    1.341778] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input1
[    1.341807] usbcore: registered new interface driver usbhid
[    1.341809] usbhid: USB HID core driver
[    1.344141] firewire_ohci: Added fw-ohci device 0000:06:04.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.844150] firewire_core: created device fw0: GUID 683f0200137d407d, S400
[    7.044620] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   23.190822] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.250037] udevd[340]: starting version 175
[   23.322823] lp: driver loaded but no devices found
[   23.544670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.603478] wmi: Mapper loaded
[   23.729050] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   23.894985] [drm] Initialized drm 1.1.0 20060810
[   23.932787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input7
[   23.932894] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.936326] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[   24.028130] MCE: In-kernel MCE decoding enabled.
[   24.062233] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:30a4]
[   24.062262] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[   24.062270] yenta_cardbus 0000:06:04.0: Using INTVAL to route CSC interrupts to PCI
[   24.062273] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to ISA
[   24.062281] yenta_cardbus 0000:06:04.0: TI: mfunc 0x00a61b22, devctl 0x64
[   24.065314] EDAC MC: Ver: 2.1.0
[   24.091332] cfg80211: Calling CRDA to update world regulatory domain
[   24.098049] AMD64 EDAC driver v3.4.0
[   24.098105] EDAC amd64: DRAM ECC disabled.
[   24.098110] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   24.098112]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   24.098114]  (Note that use of the override may cause unknown side effects.)
[   24.110982] type=1400 audit(1371977935.788:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=572 comm="apparmor_parser"
[   24.111635] type=1400 audit(1371977935.788:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser"
[   24.112058] type=1400 audit(1371977935.788:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser"
[   24.205019] [drm] radeon defaulting to kernel modesetting.
[   24.205025] [drm] radeon kernel modesetting enabled.
[   24.205139] radeon 0000:01:05.0: power state changed by ACPI to D0
[   24.205145] radeon 0000:01:05.0: power state changed by ACPI to D0
[   24.205156] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   24.205480] [drm] initializing kernel modesetting (RS480 0x1002:0x5955 0x103C:0x30A4).
[   24.205507] [drm] register mmio base: 0xC0100000
[   24.205509] [drm] register mmio size: 65536
[   24.205658] [drm] Generation 2 PCI interface, using max accessible memory
[   24.205664] radeon 0000:01:05.0: VRAM: 128M 0x0000000080000000 - 0x0000000087FFFFFF (128M used)
[   24.205668] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[   24.205687] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   24.205689] [drm] Driver supports precise vblank timestamp query.
[   24.205718] [drm] radeon: irq initialized.
[   24.206272] [drm] Detected VRAM RAM=128M, BAR=128M
[   24.206277] [drm] RAM width 128bits DDR
[   24.212818] [TTM] Zone  kernel: Available graphics memory: 1025154 kiB.
[   24.212823] [TTM] Initializing pool allocator.
[   24.212866] [drm] radeon: 128M of VRAM memory ready
[   24.212869] [drm] radeon: 512M of GTT memory ready.
[   24.212897] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   24.219112] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[   24.224432] [drm] PCIE GART of 512M enabled (table at 0x000000006D200000).
[   24.236073] radeon 0000:01:05.0: WB enabled
[   24.267048] [drm] Loading R300 Microcode
[   24.292867] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[   24.292874] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[   24.292886] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
[   24.292891] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
[   24.292895] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc020ffff
[   24.292913] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   24.292917] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[   24.300569] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[   24.392256] snd_atiixp_modem 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   24.504138] MC'97 0 converters and GPIO not ready (0x1)
[   24.607325] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   24.676876] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.676881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676884] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.676887] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676890] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.676893] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676896] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.676899] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676902] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.676905] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676908] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.676911] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676913] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.676917] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676919] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.676922] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676925] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.676928] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676931] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.676934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676937] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.676940] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676943] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.676946] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676949] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.676952] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   24.676954] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   24.676958] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[   24.725877] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   24.728215] Registered led device: b43-phy0::radio
[   24.728268] Broadcom 43xx driver loaded [ Features: PNL ]
[   24.815679] snd_atiixp 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   24.951661] input: HP WMI hotkeys as /devices/virtual/input/input8
[   25.012462] [drm] radeon: ring at 0x00000000A0001000
[   25.012484] [drm] ring test succeeded in 2 usecs
[   25.012631] [drm] radeon: ib pool ready.
[   25.012795] [drm] ib test succeeded in 0 usecs
[   25.013015] [drm] Panel ID String: LPL                     
[   25.013018] [drm] Panel Size 1280x800
[   25.024032] [drm] radeon legacy LVDS backlight initialized
[   25.028150] [drm] Radeon Display Connectors
[   25.028154] [drm] Connector 0:
[   25.028156] [drm]   VGA
[   25.028160] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[   25.028162] [drm]   Encoders:
[   25.028164] [drm]     CRT1: INTERNAL_DAC2
[   25.028166] [drm] Connector 1:
[   25.028168] [drm]   LVDS
[   25.028171] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[   25.028173] [drm]   Encoders:
[   25.028175] [drm]     LCD1: INTERNAL_LVDS
[   25.028177] [drm] Connector 2:
[   25.028179] [drm]   S-video
[   25.028181] [drm]   Encoders:
[   25.028183] [drm]     TV1: INTERNAL_DAC2
[   25.028212] [drm] radeon: power management initialized
[   25.048094] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[   25.050177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[   25.050208] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   25.050236] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   25.095243] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   25.095250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095254] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   25.095258] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095261] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   25.095265] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095268] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   25.095272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095275] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   25.095279] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095282] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   25.095285] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095288] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   25.095292] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095295] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   25.095299] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095302] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   25.095306] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095309] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   25.095313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095316] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   25.095320] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095323] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   25.095327] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.095330] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   25.095333] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.095337] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   25.095340] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.095345] cfg80211: World regulatory domain updated:
[   25.095347] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.095350] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095354] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.095357] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.095361] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.095364] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.161425] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   25.228924] [drm] fb mappable at 0xC8040000
[   25.228928] [drm] vram apper at 0xC8000000
[   25.228930] [drm] size 4096000
[   25.228932] [drm] fb depth is 24
[   25.228934] [drm]    pitch is 5120
[   25.229238] fbcon: radeondrmfb (fb0) is primary device
[   25.230048] Console: switching to colour frame buffer device 160x50
[   25.230084] fb0: radeondrmfb frame buffer device
[   25.230086] drm: registered panic notifier
[   25.230098] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[   39.886836] RPC: Registered named UNIX socket transport module.
[   39.886841] RPC: Registered udp transport module.
[   39.886844] RPC: Registered tcp transport module.
[   39.886846] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   39.900871] FS-Cache: Loaded
[   39.931956] FS-Cache: Netfs 'nfs' registered for caching
[   39.965589] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   40.069244] init: failsafe main process (849) killed by TERM signal
[   40.111373] ppdev: user-space parallel port driver
[   40.157000] Bluetooth: Core ver 2.16
[   40.157029] NET: Registered protocol family 31
[   40.157032] Bluetooth: HCI device and connection manager initialized
[   40.157037] Bluetooth: HCI socket layer initialized
[   40.157039] Bluetooth: L2CAP socket layer initialized
[   40.157049] Bluetooth: SCO socket layer initialized
[   40.175008] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.175013] Bluetooth: BNEP filters: protocol multicast
[   40.232748] Bluetooth: RFCOMM TTY layer initialized
[   40.232759] Bluetooth: RFCOMM socket layer initialized
[   40.232762] Bluetooth: RFCOMM ver 1.11
[   40.323429] type=1400 audit(1371977952.000:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=928 comm="apparmor_parser"
[   40.338119] type=1400 audit(1371977952.016:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=928 comm="apparmor_parser"
[   40.547773] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   40.550329] type=1400 audit(1371977952.228:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=968 comm="apparmor_parser"
[   40.559551] type=1400 audit(1371977952.236:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=971 comm="apparmor_parser"
[   40.560591] 8139too 0000:06:06.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   40.564921] type=1400 audit(1371977952.244:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=971 comm="apparmor_parser"
[   40.570463] type=1400 audit(1371977952.248:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=971 comm="apparmor_parser"
[   40.629067] type=1400 audit(1371977952.308:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=973 comm="apparmor_parser"
[   40.641494] type=1400 audit(1371977952.320:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=973 comm="apparmor_parser"
[   40.643506] type=1400 audit(1371977952.320:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=973 comm="apparmor_parser"
[   40.646410] type=1400 audit(1371977952.324:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=973 comm="apparmor_parser"
[   41.459567] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   41.469398] NFSD: starting 90-second grace period
[   42.338418] init: plymouth-stop pre-start process (1464) terminated with status 1
[   51.552036] eth0: no IPv6 routers present
[ 6246.071292] i2c /dev entries driver

Return To 2013-06-23 11:21 System Information